The YA Series is a 6.2 kW single-phase hybrid solar inverter for 48 V energy storage systems. It combines a built-in 8500 W MPPT solar charger (up to 120 A), AC charging and pure sine wave output at 220/230/240 VAC in one unit, transfers to battery in no more than 10 ms in UPS mode, and supports grid feed-in operation.
An RS232 port and an expansion slot for optional WiFi, lithium-battery BMS and dry-contact cards cover communication and monitoring.
The ME Series is an entry-level low-frequency inverter/charger from 0.4 to 4 kW with pure sine wave output.
The solar controller is selectable between PWM and MPPT to match system cost to the application, and low no-load loss plus pre-fitted battery cables keep installation simple — a practical choice for small backup and off-grid power.
The TQ Series is a hybrid solar inverter covering 2 to 12 kW with boosted PV input and a dual-output 12 kW flagship model.
On/off-grid operation, battery sell-back and CT-based load monitoring come as standard, and IP54 protection suits tougher installation environments. A strong fit for demanding residential and light commercial solar-plus-storage systems.
The GA PRO S adapts the GA PRO hybrid platform for 110/120 VAC markets, rated 4 to 5.5 kW.
It keeps the platform's dual AC voltage outputs, touch screen and MPPT charging, with standard on/off-grid feed-in operation for 110/120 V residential energy storage.
The HG-B is a battery-free grid-tie solar inverter for 6.5 to 11 kW PV systems, feeding solar power directly into the grid without any storage.
CT-based zero-export control keeps feed-in within local limits, and the light high-frequency design simplifies mounting. A cost-effective choice for self-consumption and feed-in projects where backup power is not required.
The SP Series is a family of portable power stations from 300 to 1800 W with 230 V or 120 V pure sine AC output.
MPPT solar charging, active PFC wide-range AC input and a 314 Ah LiFePO4 battery with 6000-cycle life provide reliable energy at home or outdoors, with AC/USB/DC outputs managed independently and 20 ms UPS transfer.
The XA is a premium hybrid solar inverter rated 6.6 to 10.6 kW with IP66 protection for true outdoor installation.
Dual built-in MPPTs, dual AC output and grid/generator dual input handle complex residential and light commercial systems, and up to 9 units can run in parallel with lithium BMS communication.
The QA Series is a hybrid solar inverter from 1.2 to 12 kW with boosted PV-side inverter power, so more of the array's energy reaches the loads.
Charging is selectable between MPPT and PWM, and on/off-grid operation, battery sell-back and CT function are all standard. It is a flexible all-rounder for residential energy storage and self-consumption.
