| Availability: | |
|---|---|
VS8048
Techfine
VS8048AM
Pure sine wave output
Can support WIFI/ GPRS
MPPT Efficiency max 98%
Optional built-in MPPT/PWM30-60A controller
DC Start & Automatic Self-Diagnostic Function
Automatically send signal to start generator
High efficiency design for optimized battery performance
Selectable charging current based on applicationsAC start-up voltage auto restart voltage
110V/120V Output Available
lead acid battery/Lithium battery
BMS function for lithium battery

Pure sine wave output
Can support WIFI/ GPRS
MPPT Efficiency max 98%
Optional built-in MPPT/PWM30-60A controller
DC Start & Automatic Self-Diagnostic Function
Automatically send signal to start generator
High efficiency design for optimized battery performance
Selectable charging current based on applicationsAC start-up voltage auto restart voltage
110V/120V Output Available
lead acid battery/Lithium battery
BMS function for lithium battery

| Model | VS8048 |
| AC input voltage | 220VAC |
| Input voltage range | 154-264VAC3V(Nor Model) 185-264VAC3V(UPS model) 175-285VAC3V(AVR Type) |
| Input frequency | 50/60Hz±5% |
| Out put power | 8000VA 6400W |
| AC model output Voltage | The output voltage under the mains is the same as theinput voltage(with AVR function 220V±10%) |
| Battery model output frequency | The output frequency under the mains is the same as the input frequency |
| Battery model output voltage | 220VAC±10% |
| Battery model output frequency | 50Hz or 60Hz ± 1% |
| Battery model output wave | Pure sine wave |
| Battery type | External lead-acid battery, Gel battery, or Lithium battery |
| Battery voltage | 48VDC |
| Battery charging voltage | 54VDC |
| Maximum PV array power | 6400W |
| Solar input voltage range | 48V: MPPT 60V-150VDC |
| Maximum Pv DisplayOpen Circuit Voltage | 150VDC |
| Maximum solar charging current | 120A |
| Maximum Ac Charge Current | 38A |
| Battery charging voltage range | 154-280VAC |
| Transfer time | ≤10ms(UPS)/≤20ms(INV) |
| Load peak ratio | MAX)3:1 |
| Protective function | Under the mains: input overcurrent fuse Under inverter: overload protection,short circuit protection, low voltage protection(with battery anti-reverse connection,board). |
| Status Display | You can view parameters such as AC voltage, AC frequency, PVvoltage, PV current, output voltageoutput frequency, battery voltage, load current and other parameters by turning the page keys. |
| Voice prompt | Low battery protection buzzer long beep Low battery buzzer beeps every second Machine fault buzzer beeps Overload buzzer beeps When the overload is less than 130%, the buzzer will sound every second, and the output will be turned off after 30S. When the overload is greater than150%the output will be turned off after 300ms. |
| Operating temperature | 0°C~40°C |
| Storage temperature | -15°C~45°C |
| Relative temperature | -10°C-90°Cno condensation |
| Noise | <45dB |
| Model | VS8048 |
| AC input voltage | 220VAC |
| Input voltage range | 154-264VAC3V(Nor Model) 185-264VAC3V(UPS model) 175-285VAC3V(AVR Type) |
| Input frequency | 50/60Hz±5% |
| Out put power | 8000VA 6400W |
| AC model output Voltage | The output voltage under the mains is the same as theinput voltage(with AVR function 220V±10%) |
| Battery model output frequency | The output frequency under the mains is the same as the input frequency |
| Battery model output voltage | 220VAC±10% |
| Battery model output frequency | 50Hz or 60Hz ± 1% |
| Battery model output wave | Pure sine wave |
| Battery type | External lead-acid battery, Gel battery, or Lithium battery |
| Battery voltage | 48VDC |
| Battery charging voltage | 54VDC |
| Maximum PV array power | 6400W |
| Solar input voltage range | 48V: MPPT 60V-150VDC |
| Maximum Pv DisplayOpen Circuit Voltage | 150VDC |
| Maximum solar charging current | 120A |
| Maximum Ac Charge Current | 38A |
| Battery charging voltage range | 154-280VAC |
| Transfer time | ≤10ms(UPS)/≤20ms(INV) |
| Load peak ratio | MAX)3:1 |
| Protective function | Under the mains: input overcurrent fuse Under inverter: overload protection,short circuit protection, low voltage protection(with battery anti-reverse connection,board). |
| Status Display | You can view parameters such as AC voltage, AC frequency, PVvoltage, PV current, output voltageoutput frequency, battery voltage, load current and other parameters by turning the page keys. |
| Voice prompt | Low battery protection buzzer long beep Low battery buzzer beeps every second Machine fault buzzer beeps Overload buzzer beeps When the overload is less than 130%, the buzzer will sound every second, and the output will be turned off after 30S. When the overload is greater than150%the output will be turned off after 300ms. |
| Operating temperature | 0°C~40°C |
| Storage temperature | -15°C~45°C |
| Relative temperature | -10°C-90°Cno condensation |
| Noise | <45dB |